|
Stylish Door Handles on Backplate from the Classical Collection at Carlisle Brass; its lever is curved like a wing which stands out against the strong square lines of the backplate.
Features:1) Solid Forged Brass
2) Rust Proof
3) Fire Resistant
4) Comply with British Standard (BS EN 1906 2001)
5) Comply with European Standard (BS EN 1634-1 2000)
6) Suitable for Interior/ Exterior Doors
7) 10 Years Guarantee
Dimensions:
Long Back Plate : 150mm X 42mm (for DL64, DL64WC, DL64Y)
Short Back Plate : 115mm X 42mm (for DL65, DL65WC)
Lever Length : 110mm Projection : 60mm
Plate Thickness : 10mm Available
Euro Profile 47.5mm Centres
British standard lever lock 57mm centers
Finishes:1) Polished Brass (PB)
2) Polished Chrome (CP)
3) Satin Chrome (SC)
Available Options: 1) Latch Plate (No Keyhole)
2) Lock Plate (Standard Keyhole)
3) Bathroom (Supplied with Thumbturn)
4) Privacy (Supplied with Thumbturn) need only Tubular Latch
5) Euro Sach Lock Cases + Euro Cylinders
Matching Accessories: 1) Matching Door Knocker (M38)
2) Matching Letter Plates (M36)
3) Matching Casement Stay (M44)
Lever lock handles have a keyhole cut into the back plate. They are used in conjunction with a mortice sash lock, which is usually 2.1/2in (64mm) or 3in (75mm) wide and consists of a latch and a deadbolt. The sash lock is fitted into the edge of the door whereas the handles are fitted to either side of the door and are connected by a spindle located in the back of the levers. When the levers are pressed, the spindle rotates and operates the latch in the sash lock allowing the door to open. When the key is turned the deadbolt is operated, locking the door. The handles are supplied complete with the spindle and fixing screws, but not with the lock which needs to be purchased as a separate item, and is normally specified to have a matching finish to the handles.
All handles are supplied in pairs with complete set of matching screws and 8.0mm spindle bar.
Matching Locks & Latches are also available in Door Locks Section |
